Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Модель: CA25T
марка: Brando
Подробности Упаковки: ящики, картонные коробки, ящики, поддоны
производительность: 100000pcs per month
транспорт: Ocean,Land,Air
Место происхождения: Нинбо, Китай
Поддержка о: 100000pcs per month
Сертификаты : CE.ISO
Порт: Ningbo,Shanghai,Tianjing
Вид оплаты: L/C,T/T,Paypal,Western Union
Инкотермс: FOB,CFR,CIF,EXW,FCA,CPT,CIP
CA25T Пневматический электромагнитный импульсный клапан
Use period
|
Failure phenomena
|
Possible Reason
|
Troubleshooting
|
During installation and commissioning
|
The valves cannot all be opened, but the leading part does act.
|
Check the gas dome pressure to see if it is too low.
|
Check the leakage
|
Some valves do not work, but the others are normal.
|
Check the valve coil connection and coil
|
Replace the accessories
|
|
The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.
|
Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.
|
Check the leakage
|
|
Z-valve. The valve inlet and blowing muzzle are installed backwards.
|
Re-install
|
||
Some valves cannot be closed. There is leakage.
|
There is some dirt or debris on the membrane, ii is blocking the moving iron core.
|
Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
|
|
A valve closing is slowly.
|
The membrane orifice is blocked.
|
Dredge the membrane orifice
|
|
During use period
|
Some valves are leaking. The membrane cannot close tightly and the valve is always open a
little.
|
There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.
|
Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
|
Coil is hot and burned out.
|
It has been turned on for too long.
|
Check the working condition of the control system.
|
|
Voltage exists but the valve does not operate.
|
Membrane is damaged and the orifice is blocked.
|
Replace the accessories in time.
|
|
Ambient temperature is below -20℃. The valve is leaking and cannot open.
|
Ambient temperature is too low and here is frost in the valve.
|
Pay attention to insulation and maintaining proper temperatures.
|
Перед выполнением любых работ по техническому обслуживанию системы убедитесь, что компоненты полностью изолированы от давления и питания.
Расходные материалы. Давление и мощность не должны применяться повторно, пока клапан не будет полностью собран. Проверка диафрагмы и пилота
должны проводиться ежегодно.
ПРЕИМУЩЕСТВА наши продукты имеют:
Корпус и крышка клапана отлиты под давлением и покрыты прозрачной краской для улучшения коррозионной стойкости.
Уплотнительная прокладка на диафрагме изготовлена из металла и резины, которая является жесткой и не протекает.
Головка электромагнитная, всасывающая, чувствительного и надежного действия.
Один за другим: та же модель, характеристики всех других продуктов, запчасти могут быть универсальными, взаимозаменяемыми.
Стабильная и надежная работа, срок службы диафрагмы достигает более 1 миллиона раз.
Пожалуйста, дайте нам запрос!
Группа Продуктов : Пылесборник импульсный клапан > Пульс -струйный клапан
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.